Perl 5 to Perl 6 guide - operators

Operators in Perl 5 to Perl 6: equivalencies and variations


A (hopefully) comprehensive list of Perl 5 operators with their Perl 6 equivalents with notes on variations between them where necessary.


This document does not explain the operators in detail. This document is an attempt to guide you from the operators in Perl 5's perlop document to their equivalents in Perl 6. For full documentation on the Perl 6 equivalents, please see the Perl 6 documentation.

Operator precedence and associativity

The operator precedence table is somewhat different in Perl 6 than it is in Perl 5, so it will not be detailed here. If you need to know the precedence and associativity of a given operator in Perl 6, refer to Operator Precedence.

Terms and list operators

The things listed in Perl 5's perlop document as unary and list operators in this section tend to be things that can also be thought of as functions, such as print and chdir. As such, you can find information about them in the functions guide. Parentheses are still used for grouping. There is one caveat: in Perl 6, it's the , (comma) that creates lists, not parentheses. So:

my @foo = 1,2,3,4,5;   # no parentheses needed 
.say for 1,2,3,4,5;    # also no parentheses 
my $scalar = (1);      # *not* a list, as there is no comma 
my $list   = (1,);     # a List in a scalar container 

The arrow operator

As you typically will not be using references in Perl 6, the arrow is probably less useful as a dereferencing operator. If you do need to dereference something, however, the arrow is the dot. It is also the dot for method calls. So, Perl 5's $arrayref->[7] becomes $arrayref.[7] in Perl 6 and, similarly, $user->name becomes $ The => arrow is used for constructing Pairs, see Pair term documentation.

Auto-increment and auto-decrement

Work as in Perl 5. The one possible caveat is that they function by calling the succ method for ++ and the pred method for --. For builtin numeric types, this is unlikely to do something unusual, but custom types can define their own succ and pred methods, so in those cases, you should probably take note of what ++ and -- will actually do.


Works as you would expect. The caveat in Perl 5's perlop about ** binding more tightly than unary minus (i. e. "-2**4" evaluates as "-(2**4)" rather than "(-2)**4)") is also true for Perl 6.

Symbolic unary operators

As in Perl 5, unary ! and - do logical and arithmetic negation, respectively. ?^ is used for bitwise logical negation, which the documentation indicates is equivalent to !. It may be relevant to note that these coerce their arguments to Bool and Numeric, respectively.

Unary ~ is the string context operator in Perl 6, so use prefix +^ for bitwise integer negation. Assumes two's complement.

+ does have an effect in Perl 6, coercing its argument to the Numeric type.

Unary \ is no more. If you really want to take a "reference" to an existing named variable, you can use item context, like so: $aref = item(@array), or maybe more familiarly by prefixing with a $: $aref = [email protected]. Please note that you're not really getting a reference, but a scalar container with the referenced object in it.

You can get a "reference" to a named subroutine by using the & sigil: $sref = &foo. Anonymous arrays, hashes, and subs return the underlying object during creation right away: $sref = sub { }.

Binding operators

=~ and !~ have been replaced by ~~ and !~~, respectively. Those of you who consider smartmatching broken in Perl 5 will be happy to hear that it works much better in Perl 6, as the stronger typing means less guesswork. See the smartmatch documentation for a more extensive explanation of how smartmatch works in Perl 6.

Multiplicative operators

Binary *, /, and % do multiplication, division, and modulo, respectively, as in Perl 5.

Binary x is slightly different in Perl 6, and has a companion. print '-' x 80; gives you a string of 80 dashes, but for the Perl 5 behavior of @ones = (1) x 80; giving you a list of 80 "1"s, you would use @ones = 1 xx 80;.

Additive operators

Binary + and - do addition and subtraction, respectively, as you would expect.

As . is the method call operator, so binary ~ acts as the concatenation operator in Perl 6.

Shift operators

<< and >> have been replaced by +< and +> .

Named unary operators

As noted above, you'll find these in the functions guide.

Relational operators

These all work as in Perl 5.

Equality operators

== and != both work as in Perl 5.

<=> and cmp have different behavior in Perl 6. <=> does a numeric comparison, but returns Order::Less, Order::Same, or Order::More instead of Perl 5's -1, 0, or 1. To get the Perl 5 behavior (with the change that it returns the Order objects, rather than integers) of cmp, you would use the leg operator.

cmp does either <=> or leg, depending on the existing type of its arguments.

~~ is the smartmatch operator as in Perl 5, but it's also just the match operator in Perl 6, as noted above. For how smartmatching works in Perl 6, see the smartmatch documentation.

Smartmatch operator

See the smartmatch documentation for a more extensive explanation of how smartmatch works in Perl 6.

Bitwise And

Binary & is +& in Perl 6.

Bitwise Or and Exclusive Or

Bitwise OR has changed from | in Perl 5 to +| in Perl 6. Similarly, bitwise XOR ^ is +^, except this operates on integers.

C-style Logical And


C-style Logical Or


Logical Defined-Or

Remains in Perl 6 as //. Returns the first defined operand, or else the last operand. Also, there is a low precedence version, called orelse.

Range operators

In list context, .. operates as the range operator and should not need to be changed. That said, there are exclusionary range operators that may be useful. These are:

The following example shows the effects of all the above range operators (please note parentheses are used only to allow the method call):

(1..^5).list;  # (1 2 3 4) 
(1^..5).list;  # (2 3 4 5) 
(1^..^5).list# (2 3 4) 
(^5).list;     # (0 1 2 3 4) 

In Perl 5, in scalar context, the operators .. and ... work as flip-flop operators, even if they are little-known and probably less used. Those operators have been replaced in Perl 6 by ff and fff respectively.

Conditional operator

The conditional operator ? : has been replaced by ?? !!:

$x = $ok  ? $yes  : $no;  # Perl 5 
$x = $ok ?? $yes !! $no;  # Perl 6 

Assignment operators

Although not fully documented, S03 indicates that the mathematical and logical assignment operators should work as you would expect. The one noticeable change is that .= calls a mutating method on the object on the left (which can also be a type-object). This allows for the following useful idiom:

class LongClassName {
    has $.frobnicate;
my LongClassName $bar .= newfrobnicate => 42 ); # no need to repeat class name 

This ensures that $bar will only be able to contain a LongClassName object, as well not having to repeat (and possibly misspell) the class name.

~= is the string concatenation assignment, as you might expect with the changes in . and ~. Also, the bitwise assignment operators are likely not separated into numeric and string versions (&=, etc., vs. &.=, etc.), as that feature is currently experimental in Perl 5 itself - although, again, this is not specifically documented.

Comma operator

The comma operator works mostly as expected, but technically it creates Lists) or separates arguments in function calls. Also, there is a : variant that turns function calls into method calls - see this page.

The => operator, or fat arrow, works similarly to the Perl 5 "fat comma" in that it allows an unquoted (ordinary) identifier on its left side, but in Perl 6 constructs Pair objects, rather than just functioning as a separator. If you are trying to just literally translate a line of Perl 5 code to Perl 6, it should behave as expected.

List operators (rightward)

Like the Named Unary Operators, you'll find these discussed under Functions.

Logical Not

The lower precedence version of !. As with !, coerces its argument to Bool.

Logical And

Lower precedence version of && as in Perl 5.

Logical or and Exclusive Or

or is the low precedence version of ||, and xor is the low precedence version of ^^.

Additionally, there is a low precedence version of //, called orelse.

Quote and quote-like operators

For all the gory details on quoting constructs, see quoting.

There is a quoting operator that allows absolute literal strings: Q or 「…」, although the latter might be difficult to find on your keyboard, depending on your keyboard... Backslash escapes do not apply in Q quoted strings. E. g. Q{This is still a closing curly brace → \} renders "This is still a closing curly brace → \".

q does what you expect, allowing backslash escapes. E. g. q{This is not a closing curly brace → \}, but this is → } returning "This is not a closing curly brace → }, but this is →". As in Perl 5, you can get this behavior with single quotes.

qq allows interpolation of variables. However, by default, only scalar variables are interpolated. To get other variables to interpolate, you need to put square brackets after them (the so-called zen-slice) to get them to interpolate. E.g. @a = <1 2 3>; say qq/@a[] [email protected]/; results in "1 2 3 [email protected]". Hashes interpolate in the same manner: %a = 1 => 2, 3 => 4;say "%a{}"; results in a space separating the pairs and tabs separating the key from the value in each pair (because that's the standard stringification of Pairs, and a hash acts as list of Pairs when stringified). You can also interpolate Perl 6 code in strings using curly braces. For all the details, see Interpolation.

qw works as in Perl 5, and can also be rendered as <...> . E. g. qw/a b c/ is equivalent to <a b c> .

There is also a version of qw that interpolates, which is qqw. So my $a = 42;say qqw/$a b c/; gives you "42 b c".

Shell quoting is available through qx, but you should note that backticks do not do shell quoting as in Perl 5, and Perl variables are not interpolated in qx strings. If you need to interpolate Perl variables in a shell command string, you can use qqx instead.

The qr operator is gone from Perl 6.

tr/// works similarly to how it does in Perl 5. The one caveat is that ranges are specified differently. Instead of using a range "a-z", you would use "a..z", i. e. with Perl's range operator. tr/// has a method version, which is better documented, called .trans. .trans uses a list of pairs, as follows: $x.trans(['a'..'c'] => ['A'..'C'], ['d'..'q'] => ['D'..'Q'], ['r'..'z'] => ['R'..'Z']); A much more extensive description of the uses of .trans can be found at The y/// equivalent has been done away with.

Heredocs are specified differently in Perl 6. You use :to with your quoting operator, e. g. q:to/END/; would start a heredoc ending with "END". Similarly, you get escaping and interpolation based on your quoting operator, i. e. literals with Q, backslash escapes with q, and interpolation with qq.

I/O operators

The full details on Input/Output in Perl 6 can be found at io.

As <...> is the quote-words construct in Perl 6, <> is not used for reading lines from a file. You can do that by either making an IO object from a file name or using an open filehandle and then, in either case, calling .lines on it. I. e. either my @a = "filename".IO.lines; or my $fh = open "filename", :r;my @a = $fh.lines; (In the latter case, we are using :r to specifically open the file for reading). To do this in an iterative manner, you can use a for loop this way:

for 'huge-csv'.IO.lines -> $line {
    # Do something with $line 

Note the use of -> there. That's part of the Block syntax, and in Perl 6 is needed for if, for, while, etc.

If you want to slurp the entire file into a scalar, you would - surprise! - use the .slurp method. For instance

my $x = "filename".IO.slurp;
# ... or ... 
my $fh = open "filename":r;
my $x = $fh.slurp;

As noted in the Special Variables guide, the ARGV magic input filehandle has been replaced by $*ARGFILES, and the @ARGV array of command line arguments has been replaced by @*ARGS.


1 while foo(); works in the same way as it does in Perl 5, however it generates a warning. In Perl 6 the idiom is now written as Nil while foo(); instead.

Bitwise string operators

Documented individually above, but to summarize...

Bitwise integer negation is prefix +^. Bitwise boolean negation is ?^.

Bitwise and is +&.

Bitwise integer or is +|. Bitwise integer xor is infix +^. Bitwise boolean or is ?|.

Left shift and right shift are +< and +> .